For extreme Conditions for Snow clearing

The new FS High Performance add-on snow cutter blower from Schmidt is characterized by a plus in performance. With the revision of the milling helix and the blower wheel, the successor to the FS has achieved a considerable increase in performance of approx. 25%. This efficiently clears hard and icy snow from the front. Edge walls, which typically arise when clearing with snow plows, can also be removed without any problems. This is made easier by the side cutter, which is attached to the outside of the milling reel. At the same time, this also ensures optimum maneuverability when clearing bends. The stable construction of the FS-HP snow cutter blower is created for extreme conditions and can withstand heavy loads. With a clearing capacity of up to 1,800 tons per hour, nothing stands in the way of versatile use in the entire municipal winter service.

"With the FS High Performance snow cutter blower, we are proud to offer one of the most powerful cutter blowers on the market," says Emil Wasmer, Product Manager at Schmidt in St. Blasien. “The powerful snow cutter blower is designed for the most extreme conditions and various areas of application. In addition, the machine impresses with its extremely convenient operation and increased safety aspects. "

The adapted lifting system and the revised drive train allow a center of gravity close to the vehicle and thus increase stability while driving. The short extension not only ensures an optimal overview from the driver's cab, but also simplifies handling. This has a positive effect on safety during snow removal for drivers and other road users. In addition, the power flow is automatically interrupted if the snow blower hits an obstacle while working. Laborious replacement of shear bolts in wind and weather is no longer necessary. The driver can easily reverse the vehicle and drive around the obstacle. This additionally increases the safety for the driver and the machine.

The discharge chute can be hydraulically rotated by 275 ° and thus enables targeted snow discharge to the side. Thanks to the high circumferential speeds and the extra large impeller blades, large throwing distances of up to 35 meters can be achieved. This is particularly important when clearing snow outside the city. Alternatively, the compact snow jet can be directed precisely onto the flatbed of a truck, for example when clearing snow in urban areas. The FS High Performance snow cutter blower also cuts a fine figure at airports or in the mountains. The powerful clearing head can even be used as an attachment for efficient snow clearing on rails.

The FS-HP add-on snow cutter blower is available in different variations of drum or blower wheel diameters. With clearing widths between 1,600 mm and 2,650 mm and a maximum snow depth of 1,000 mm to 1,500 mm, a wide range of requirements is covered. The snow cutter blowers of the FS-HP series can be attached to the Unimog of the new as well as the old generation, as well as to tractors and carrier vehicles with hydraulic device drive, such as wheel loaders and yard loaders.

Regardless of whether it is interurban roads, communal areas or on mountain roads - the new FS High Performance snow cutter blower from Schmidt clears the way for you.